not found

Your browser is out of date!

This website uses the latest web technologies so it requires an up-to-date, fast browser!
Try Firefox or Chrome!

RIGS FLEET

BMP operates a small to big fleet of many type drilling rigs, plants and equipment with supporting equipment including mud system, mud pump & solid control, cementing system, down hole tubular & tools, handling tools, survey & fishing tools, BOP/well control equipment, support vehicles, power plant, lighting towers, safety equipment, communication, site building, storage and camp facility units.

SCHRAMM T130XD ROTADRILL
Multipurpose Mobile Land Rig for Rotary Mud, Deep Coring & RC Drilling
⇨ Dimension (LxWxH-in M) : 13.0 x 2.6 x 4.1transport
⇨ Dimension (LxWxH-in M) : 13.0 x 2.6 x 21.65 mast up/extended
⇨ Weight : 43Ton
⇨ 760HP Engine Detroit/MTU V12 2000 Series
⇨ 130,000Lbs (59Ton) Pull Up
⇨ 32,000Lbs Pull Down
⇨ Dual Capacity Compressor 1,350cfm/350psi and 1,500cfm/500psi
⇨ Drill Pipe 30’ x 4-1/2” OD
⇨ 500Bbl Surface Mud System and Solids Control
⇨ Depth Capacity : Mud Rotary > 2,000M

GEFCO SPEEDSTAR 40K
Multipurpose Mobile Land Rig for Rotary Mud & RC Drilling
⇨ Dimension (LxWxH- in M) : 13.1 x 2.6 x 4.0 transport
⇨ Dimension (LxWxH- in M) : 13.1 x 2.6 x 11.0 mast up
⇨ Weight : 28.5 Ton
⇨ 550HP Engine CAT C-15
⇨ Western Star Truck Mounted
⇨ Top head rated working capacity 36.5 Ton
⇨ Pull down and hold back capacity: 11 Ton and 18 Ton
⇨ On board 1,000cfm/350psi Sullair 2 Stages Twin Screw Rotary Compressor
⇨ Onboard Gardner Denver 5½”x8” Mud Pump cap.840LPM (220GPM)/330psi
⇨ 200Bbl Surface Mud System and Solids Control
⇨ Depth Capacity : RC 1,000 m 

DESCO SP7000SA
Multipurpose Crawler Rig for Rotary Mud, Coring & RC Drilling
⇨ Dimension (LxWxH- in M) : 9.0 x 2.3 x 2.7 transport
⇨ Dimension (LxWxH- in M) : 9.0 x 2.3 x 9.5 mast up
⇨ Weight : 9.5 Ton
⇨ Crawler Mounted
⇨ Engine: Hyundai D6AZ250 HP @1800RPM
⇨ Off board Compressor (optional)
⇨ Fuel & Hyd. Tank 280Lt
⇨ Rotation Torque & Speed : 500-1000Kg.M (low-high)
0-60RPM (low); 0-120RPM (high)
⇨ Pull up and down capacity : 25 Ton and 12 Ton
⇨ Onboard Mud Pump cap. 800LPM/40 Bar
⇨ Drill pipe length max. 6.0 M
⇨ Working Table & Hyd. Clamp 18”
⇨ Standard OD pipe & casing: 3 ½” – 5”
⇨ Depth Capacity : RC 400 m ; PQ 450 m, HQ 750 m, NQ 1,300 m

HANJIN P6000SD-RC
Multipurpose Crawler Rig for Rotary Mud, Coring & RC Drilling
⇨ Dimension (LxWxH- in M) : 9.0 x 2.2 x 2.6 transport
⇨ Dimension (LxWxH- in M) : 9.0 x 2.2 x 9.5 mast up
⇨ Weight : 7.5 Ton
⇨ Crawler Mounted
⇨ Engine: Hyundai D6BR-G1 165 HP
⇨ Off board Compressor (optional)
⇨ Pull up and down capacity : 16 Ton and 8 Ton
⇨ Onboard JDMP200 Mud Pump cap. 200LPM/40 Bar
⇨ Drill pipe length max. 6.0 M
⇨ Standard OD pipe & casing: 3 ½” – 5”
⇨ Depth Capacity : RC 250 m ; PQ 300 m, HQ 500 m, NQ 1,000 m

VERMEER D50x100A NAVIGATOR
Crawler Rig for Down Hole Hammer Drilling
⇨ Dimension (LxWxH in M) : 6.4 x 2.4 x 2.5
⇨ Operating Weight : 13,245 Kg
⇨ Engine Cummins 185 HP
⇨ Max. Travel Speed 3.4 Kmph
⇨ Rod diameter 3.5” (Standard) and length 15 ft (4.6 m).
⇨ Separate Screw Compressor 1,100cfm/350psi
⇨ Max. flow water system 548 LPM; Max. flow pressure 1,000psi
⇨ Automated rod loader
⇨ Actual thrust and pull back 17,230 Kg and 22,500 Kg
⇨ Max. spindle torque @ 160 RPM 3,300 ft-lb (4,470 Nm)
⇨ Minimum bore diameter 4.5” (11.4 cm)

VERMEER D50x88 VBM NAVIGATOR
Crawler Rig for Rotary Mud &Down Hole Hammer Drilling
⇨ Dimension (LxWxH in M): 6.98 x 2.49 x 2.3
⇨ Operating Weight: 10,000 Kg
⇨ Engine John Deere 4045 173 HP
⇨ Max. Travel Speed 3.4 Kmph
⇨ Rod diameter 2.875” (Standard) and length 15 ft (4.6 m).
⇨ Separate Screw Compressor 1,100cfm/350psi
⇨ Max. flow water system 265 LPM; Max. flow pressure 1,100psi
⇨ Automated rod loader
⇨ Actual thrust and pull back 22,727.30 Kg and 22,727.30 Kg
⇨ Max. spindle torque @ 160 RPM 8,800 ft-lb (11,931 Nm)
⇨ Minimum bore diameter 3.5” (8.9 cm)

FURUKAWA HCR1500-ED
Crawler Rig for Top Hammer Drilling
⇨ Overall Length:10.05 M;    Overall Width with Pre-Cleaner: 3.725 M
⇨ Overall Transport Height: 3.5 M
⇨ Operating Weight: 16,950 Kg
⇨ Engine Cummins 300 HP @ 2,200 RPM
⇨ Max. Travel Speed 4.2 Kph
⇨ Bit diameter 3.5” – 6”
⇨ Rod size T-51 and length 12 ft.

SUNWAR DE165
Crawler Rig for DTH/Down Hole Hammer Drilling
⇨ Weight: 19,000 Kg
⇨ DTH Hammer DHD360
⇨ Drilling Rod Dia. (mm) 110
⇨ Onboard Sullair Compressor 780cfm/310psi

CS1000 Heli-portable
Skid Mounted for Diamond Coring & Rotary Mud
⇨ Dimension (HxWxL in M) : 2.30 x 2.00 x 4.00standby
⇨ Dimension (HxWxL in M) : 8.40 x 2.00 x 4.00operating
⇨ Wheel (optional)
⇨ Engine : Deutz 87 HP
⇨ Pull back 6,000Kg
⇨ Mud Pump Capacity 50GPM
⇨ Depth Capacity : NQ 750 m, HQ 450 m, PQ 250 m

3011 SONICMAST CST
Crawler Rig for Sonic Drilling

 

 

 

 

 

 

 

AIRTRACK IRCM345
Crawler Rig for Top Hammer Drilling
⇨ Cummins Portable Screw Rotary Compressors 600cfm/175psi
⇨ Fast Track Type HP600WCU

BMP250 Man-portable
Skid Mounted for Diamond Coring
⇨ Dimension (HxWxL in M) : 2.00 x 1.32 x 5.75standby
⇨ Dimension (HxWxL in M) : 5.75 x 1.32 x 2.50operating
⇨ Skid mounted rig
⇨ Towing Kit & Wheel (optional)
⇨ Engine 46HP V2203 Kubota
⇨ Total Weight1,600Kg
⇨ Max. Weight305Kg (in piece)
⇨ Pull Back 2,500Kg
⇨ Top head drive with 3.5m stroke
⇨ Hydraulic foot clamp
⇨ Mud Pump capacity 120LPM
⇨ Wire line winch
⇨ Main haul winch
⇨ Simple to operate control panel
⇨ Drilling depth NQ 300mHQ 150m

BMP200 Man-portable
Skid Mounted for Diamond Coring
⇨ Dimension (HxWxL in M) : 1.70 x 1.20 x 3.70standby
⇨ Dimension (HxWxL in M) : 3.70 x 1.20 x 2.10operating
⇨ Skid mounted rig
⇨ Engine 38HP V1505 Kubota
⇨ Total Weight1,500Kg
⇨ Max. Weight305Kg (in piece)
⇨ Pull Back 2,000Kg
⇨ Top head drive with 3.5m stroke
⇨ Hydraulic foot clamp
⇨ Mud Pump capacity 120LPM
⇨ Wire line winch
⇨ Main haul winch
⇨ Simple to operate control panel
⇨ Drilling depth NQ 200mHQ 100m

BMP100 Man-portable
Skid Mounted for Diamond Coring
⇨ Dimension (HxWxL in M) : 1.70 x 1.10 x 3.20standby
⇨ Dimension (HxWxL in M) : 3.50 x 1.10 x 3.20operating
⇨ Skid mounted rig
⇨ Engine 22HP D905E Kubota
⇨ Total Weight 750Kg
⇨ Max. Weight 125Kg (in piece)
⇨ Pull Back 1,500Kg
⇨ Top head drive with 2.2m stroke
⇨ Hydraulic foot clamp
⇨ Mud Pump capacity 120LPM
⇨ Wire line winch
⇨ Main haul winch
⇨ Simple to operate control panel
⇨ Drilling depth NQ 125mHQ 60m

To see the technical specification of our rigs, please click on the links below:

SCHRAMM T130XD ROTADRILL Specification
GEFCO SPEEDSTAR 40K Specification
DESCO SP7000SA Specification
HANJIN P6000SD-RC Specification
VERMEER D50x100A NAVIGATOR Specification
VERMEER D50x88 VBM NAVIGATOR Specification
FURUKAWA HCR1500-ED Specification
SUNWAR DE165 Specification
CS1000 Heli-portable Specification
3011 SONICMAST CST Specification
AIRTRACK IRCM345 Specification
BMP250 Man-portable Specification
BMP200 Man-portable Specification
BMP100 Man-portable Specification